Solitaire Rings

01 RING TROMPETA

Round silver 3mm thread ring in the form of cornet on the top with a 4mm diameter Brilliant Diamond

02 RING LIRA
Round silver 3mm thread ring in which the two ends of the thread sourcing in the meeting point and in opposite directions, face and lift. Each of the ends of the thread has a 2mm brilliant diamond

03 JONC RING
It is like the 02 LIRA model but has a cut that slices both ends of the thread so they  can hold  a 5 mm brilliant diamond in the gap

04 RING YES WITH A CUT
Round silver 3mm thread ring in which one of the ends protrudes vertically at the point of encounter and the ending is sliced to room a 2mm brilliant diamond

05 MONTSERRAT RING
Round silver 3mm thread ring that at one of the points on the surface has a prominence that emulates a hill in the Sierra de Montserrat in Barcelona. This ring can be combined with other similar so that it looks like the Montserrat Mountain Range

06 RING YES
Are you planning to ask your fiancee for her future plans? Do you want to get her “Yes”? This is your ring. Round silver 3mm thread ring in which one of the ends protrudes vertically in the meeting point with the other. The protruding end has a 2 mm brilliant diamond

07 RING CHAIR M
Ring with rectangular section, having low and wide profile, that in the upper part and coming from the sides arise 4 legs cut from same body of the ring, that once raised in a movement from the midpoint M towards each one of the point sides L, serve as pillars holding a diamond of 4, 5, 6 mm

Lafotografica 034

 

 

 

08 RING CHAIR L
Ring with rectangular section, having low and wide profile, that in the upper part and in the sides arise 4 legs cut from the same body of the ring, that once raised in a movement from the points L (to the sides of the point M) towards the center serves as pillars to hold the diamond 4, 5, 6 mm

 

09 ESCLAT RING
Flat section ring on the outside, round inside, which has four legs in the upper part that, in the form of a dispenser, come from a single point where four jets emerge. Among them, they hold a 4,5,6 mm diamond.

10 RING CHAIR LBE (Narrow Banda)
Ring with squared section, that in the upper part and in the sides trims 4 legs of the same body of the ring, that once raised in a movement from the points L (to the sides of the point M) towards the center serves as pillars to hold a 4, 5, 6 mm diamond.

Unlike Chair L Normal, once the legs are trimmed, the rest of the circular section of the ring does not retrieve its initial width, because the thickness of the leg is also circularly cut off and therefore the ring is narrower.

11 RING MANHATTAN
Ring of square or rectangular section that in the high point forms a rectangular prism. On top of it lays a diamond carving princess (square) or bagette (rectangular). The prism may have different heights.
This ring can be combined with other similar so that it looks like skyscraper skyline in Manhattan.

12 RING GARDENING POT
Ring of rectangular section that in the high point forms an inverted pyramidal prism. On top of it is a diamond carving princess (square) or bagette (rectangular). The prism may have different heights.
This ring can be combined with other similar so that it looks like a garden area.

13 RING COPA
Ring of rectangular section that in the high point forms an inverted conical prism. On top of it lays a brillinat diamondis. The prism may have different heights.
This ring can be combined with other similar so that it looks like a point of light area.

The inside of the ring has no circular but elliptical shape. It can be combined with others in a circumference. Salvador Mallol Joyero has done a study that concludes that the organic form of said is elliptical and not rounded, so that if the inside of a ring is elliptical, the stone is positioned above all and does not move nor tumble in the long of the time it takes place, which makes the stone shine and looks much more.

14 RING CAMALEON
Ring of rectangular section that is formed by bending a long silver strip in two. In the bend, 2 diamonds will be nailed to both sides. and with the double formed strip it is given a circular shape to form a ring.

15 RING PISTON
Round silver 3mm thread ring that has a cylinder in the top part where lay a 4,5,6 mm brilliant

16 COIXINET RING
Ring of round section of 1mm that has a volume that comes out to make a replica of the volume we would have if we cut a pillow in half. This volume set by its narrow part at the top of the ring support a 4,5,6mm diamond

17 BULB RING
Ring of round 1mm thread that has a volume in the upper part like a spiral cylindric row. This volume at the top has placed a 4.5.6mm brilliant diamond

18 REGALIM RING
Ring of round section of 1mm, 2mm or 3mm, which in the meeting point between the ends, one of them comes with the melted tip in the form of a drop of water. This gives an effect of a drop of water that slides around the ring in the form of a gown.

19 RING ABOICE
Ring of flat section on the outside, round on the inside, in which one end ends up on top of the other. In the superposition area a 4.5.6 mm brightness is nailed. The width of the section is lower at the bottom of the ring than at the top (Afuat)

20 DUNA RING
Ring of rectangular section of very thin height, which in the upper part is made a rise in the surface in the form of a sand dune, at the end of which is nailed a shining of 2,3,4mm

 

21 MICENIC RING
Ring of round section of 1mm, 2mm or 3mm, that the point of union is processed without welding. With a millenarian system called Mycenaean welding, which is the material itself in the form of a thin sheet that melts, who does welding.

22 GRESOL RING
Ring of round section of 3 mm, that in the high point forms half bottom part of sphere, in the form of crucible. In the upper flat part of the crucible it has a bright 4.5.6 mm

23 BOL RING

Ring of round section of 3 mm, that in the high point forms half sphere in the form of bowl. In the upper flat part of the crucible it has a bright 4.5.6 mm